SAM Ratchet Combination Spanner, 350 Mm Overall, 1"7/16mm Jaw Capacity, Comfortable Soft Grip Handle, Non Sparking: No, Finish: Chrome Plated, MPN: 50-1"3/8

Festo 40mm Deep PUR Pneumatic Suction Cup ESV-40-EU

Festo 40mm Deep PUR Pneumatic Suction Cup ESV-40-EU.

Festo 40mm Flat BR Suction Cup ESV-40-SNA

Festo 40mm Flat BR Suction Cup ESV-40-SNA.

RS PRO Threaded Fitting, Straight Threaded Adapter, Female Metric M14 to Male BSPT 1/4in, Material: Brass

RS PRO Threaded Fitting, Straight Threaded Adapter, Female Metric M14 to Male BSPT 1/4in.

C & K Toggle Switch, PCB Mount, On-(On), SPDT, Through Hole Terminal, Contact Current Rating: 400 mA @ 20 V dc, IP Rating: IP57, Actuator Length: 12.7mm, Actuator Material: Brass, Contact Material: Gold Over Nickel Plated Copper Alloy, Contact Resistance: 0.01Ω, Maximum Operating Temperature: +85°C, Minimum Operating Temperature: -30°C, Operating Temperature Range: -30 → +85°C, MPN: E101SD1AV2BE

C & K Toggle Switch, PCB Mount, On-(On), SPDT, Through Hole Terminal.

RS PRO Hose Connector 3/8in ID, 99 bar, Body Material: Brass, Connector Gender: Female, Threaded Connection: M20 x 1.5

RS PRO Hose Connector 3/8in ID, 99 bar.

RS PRO Quick Exhaust Valve, 1/4 in Female, Threaded, 6mm, Manufacturer Series: 66050, Built-In Silencer: No

RS PRO Quick Exhaust Valve, 1/4 in Female, Threaded, 6mm.

Portescap Brushless Geared DC Geared Motor, 20.6 W, 24 V dc, 0.1611 Nm, 247 rpm, 3mm Shaft Diameter, MPN: 16ECP 36 8B 108 04 R16 0 30.2

1611 Nm, 247 rpm, 3mm Shaft Diameter.Portescap Brushless Geared DC Geared Motor, 20.6 W, 24 V dc, 0.

SAM 197 Drill, MPN: 19705

SAM 197 Drill.

SAM Hexagon Screwdriver Bit, 5 mm Tip, 5/16 in Drive, Hexagon Drive, 35 mm Overall, Type: Impact Scredriver Bit, Material: Steel, MPN: 23-97-H5

SAM Hexagon Screwdriver Bit, 5 mm Tip, 5/16 in Drive, Hexagon Drive, 35 mm Overall.

SAM Steel Bumping Hammer with Hickory Wood Handle, 460g, Non Sparking: No, Overall Length: 300 mm, MPN: 295-11

SAM Steel Bumping Hammer with Hickory Wood Handle, 460g.

Festo Adapter HAPB-16

Festo Adapter HAPB-16.

Festo Adapter HAPG-24, For Use With Pneumatic Cylinder & Actuator

Festo Adapter HAPG-24, For Use With Pneumatic Cylinder & Actuator.

Festo Adapter HAPG-79, For Use With Pneumatic Cylinder & Actuator

Festo Adapter HAPG-79, For Use With Pneumatic Cylinder & Actuator.

Festo Adapter HAPG-80, For Use With Pneumatic Cylinder & Actuator

Festo Adapter HAPG-80, For Use With Pneumatic Cylinder & Actuator.

Festo 3 Finger Double Action Pneumatic Gripper, Parallel Gripping Type, Manufacturer Series: HGDT, Maximum Operating Pressure: 8 bar, MPN: HGDT-25-A-G1

Festo 3 Finger Double Action Pneumatic Gripper, HGDT-25-A-G1, Parallel Gripping Type.

TDK 2pF Multilayer Ceramic Capacitor MLCC, 50V dc V, ±0.25pF, Through Hole, Package/Case: Radial, Dielectric: C0G, Dimensions: 4 x 5.5 x 2.5mm, Length: 4mm, Height: 5.5mm, Series: FG, Lead Spacing: 5 mm, Maximum Operating Temperature: +125°C, Minimum Operating Temperature: -55°C, MPN: FG28C0G1H020CNT00

TDK 2pF Multilayer Ceramic Capacitor MLCC, 50V dc V, ±0.

EPCOS 1.7 mH -30 → +50% Ferrite Power Line Choke, Max SRF:10kHz, 10A Idc, 9.8mΩ Rdc 300 V ac, B82746S, Mounting Type: Radial, Length: 45mm, Depth: 23mm, Height: 47mm, Dimensions: 45 x 23 x 47mm, Lead Pitch: 17.5mm, Lead Diameter: 1.25mm, Maximum Operating Temperature: +125°C, MPN: B82746S4103A020

7 mH -30 → +50% Ferrite Power Line Choke, Max SRF:10kHz, 10A Idc, 9.

TRACOPOWER THD 10N DC-DC Converter, 3.3V dc/ 2.7A Output, 9 → 18 V dc Input, 10W, Through Hole, +85°C Max Temp, Input Voltage Nominal: 12 V dc, Isolated: Yes, Package: DIP 24, Isolation Voltage: 1.5kV dc, Depth: 10.2mm, Length: 31.8mm, Width: 20.3mm, Load Regulation: 0.012, MPN: THD 10-1210N

7A Output, 9 → 18 V dc Input, 10W, Through Hole, +85°C Max Temp.3V dc/ 2.

TRACOPOWER THL 10 DC-DC Converter, 5V dc/ 2A Output, 18 → 36 V dc Input, 10W, Through Hole, +80°C Max Temp -40°C, Input Voltage Nominal: 24 V dc, Isolated: Yes, Package: 1 x 1 in, Isolation Voltage: 1.5kV dc, Depth: 10.2mm, Length: 25.4mm, Load Regulation: 0.005, MPN: THL 10-2411

TRACOPOWER THL 10 DC-DC Converter, 5V dc/ 2A Output, 18 → 36 V dc Input, 10W, Through Hole, +80°C Max Temp -40°C.

Panasonic 10μF Surface Mount Polymer Capacitor, 25V dc, Capacitance: 10µF, Equivalent Series Resistance: 65mΩ, Lead Pitch: 2.1mm, Tolerance: ±20%, Height: 5.9mm, Maximum Operating Temperature: +125°C, Dimensions: 6.3 (Dia) x 5.9mm, Series: SVPD, Diameter: 6.3mm, Dissipation Factor: 10%, Leakage Current: 50 μA, Lifetime: 2000h, MPN: 25SVPD10M

Panasonic 10μF Surface Mount Polymer Capacitor, 25V dc.

Murata Ferrite Bead, 2 x 1.25 x 0.85mm (0805 (2012M)), 470Ω impedance at 100 MHz, Current Rating: 400mA, Length: 2mm, Depth: 1.25mm, Application: High Speed Signal Lines, Maximum DC Resistance: 400mΩ, Series: BLM, MPN: BLM21BB471SN1D

85mm (0805 (2012M)), 470Ω impedance at 100 MHz.25 x 0.

Murata, LQH5BPN, 5050 Shielded Wire-wound SMD Inductor with a Ferrite Core, 10 μH ±20% Wire-Wound 2A Idc, Length: 5mm, Height: 2mm, Dimensions: 5 x 5 x 2mm, Shielded: Yes, Maximum DC Resistance: 106mΩ, Maximum Self Resonant Frequency: Minimum of 25MHz, Maximum Operating Temperature: +125°C, MPN: LQH5BPN100MT0L

Murata, LQH5BPN, 5050 Shielded Wire-wound SMD Inductor with a Ferrite Core, 10 μH ±20% Wire-Wound 2A Idc.

SAM Rectangular Carbon Steel Mallet 565kg, Replaceable Face: No, MPN: 308-5N

SAM Rectangular Carbon Steel Mallet 565kg.

SAM Steel Tool Holder Mounting Rail, Set Contents: Pneumatic Compressor, MPN: 3240-14

SAM Steel Tool Holder Mounting Rail.

SAM Air Shear, MPN: 358-25-G

SAM Air Shear.

SAM Ratchet Combination Spanner, 350 mm Overall, 1"7/16mm Jaw Capacity, Comfortable Soft Grip Handle, Non Sparking: No, Finish: Chrome Plated, MPN: 50-1"3/8

SAM Ratchet Combination Spanner, 350 mm Overall, 1"7/16mm Jaw Capacity, Comfortable Soft Grip Handle.

Festo 2 Finger Double Action Pneumatic Gripper, Parallel Gripping Type, Manufacturer Series: HGP, Maximum Operating Pressure: 8 bar, MPN: HGP-16-A-B-SSK

Festo 2 Finger Double Action Pneumatic Gripper, HGP-16-A-B-SSK, Parallel Gripping Type.

Festo Double Action Pneumatic Gripper, Parallel Gripping Type, Manufacturer Series: HGPD, Maximum Operating Pressure: 8 bar, MPN: HGPD-16-A-G2

Festo Double Action Pneumatic Gripper, HGPD-16-A-G2, Parallel Gripping Type.

Festo 2 Finger Double Action Pneumatic Gripper, Parallel Gripping Type, Manufacturer Series: HGPL, Maximum Operating Pressure: 8 bar, MPN: HGPL-40-40-A-B

Festo 2 Finger Double Action Pneumatic Gripper, HGPL-40-40-A-B, Parallel Gripping Type.

Festo 2 Finger Double Action Pneumatic Gripper, Parallel Gripping Type, Manufacturer Series: HGPM, Maximum Operating Pressure: 8 bar, MPN: HGPM-12-EO-G9

Festo 2 Finger Double Action Pneumatic Gripper, HGPM-12-EO-G9, Parallel Gripping Type.